Quad Integrity & Inspections Group is an accredited Engineering inspections services company providing Asset Integrity / Reliability support, non-destructive testing (NDT), Joint Integrity and weld inspection related services to a vast range of industries – Power Generation, Petroleum & Gas, Water Resources, Food/Beverage, mining, construction, power generation, foundries Off-shore, rail, Storage tanks/Reservoir facilities and other allied companies

Our highly skilled technicians are supported by the latest high-tech equipment which can be mobilised for work throughout Canada and the USA.

We specialise in large scale shutdowns, outages & construction projects, where a full on-site inspection team are required.  These teams will include full supervision and a host of inspection techniques and capabilities to fulfill our client requirements. Our mission is to ensure that process facilities run safely, efficiently and yield optimal financial returns. We achieve this through the provision of services that include Non-Destructive Testing (NDT), industrial cleaning, third party inspection, bolt torqueing, leak repair and corrosion management.

Our Certification and endorsements are actively audited and updated to industry standards to ensure the technical competency, quality and safety of our services whilst also ensuring our environmental impact is minimal.

Our inspection and engineering team have numerous certifications and professional affiliations with industry bodies listed below:

Certified Areas of Our Engineers, Inspectors and NDT Technicians

Engineers and inspectors are Trained/ qualified to the following core areas:

ASME Section I, Section II, section III, Section IV, Section V, section VI, Section VII, Section VIII(D1/D2), Section IX, Section X, Section XI, Section XII. ASME B-31.1, ASME B31.3, National Board- In-service and New Construction Inspection of BPV. API 510- Pressure Vessel Inspection Code. API 570 – Piping Inspection Code. API 653 – Tank Inspection, Repair, Alteration, and Reconstruction. API 936 – Refractory Installation Quality Control – Inspection & Testing Monolithic Refractory API Individual Certification Program (ICP)API RP 1169 – Basic Inspection Requirements for New Pipeline Construction API RP 572 – Inspection of Pressure Vessels. API RP 573 – Inspection of Fired Boilers and Heaters API RP 574 – Inspection Practices for Piping System Components. API RP 575 – Inspection Practices for Atmospheric and Low Pressure Storage Tanks. API RP 577 – Welding Processes, Inspection, and Metallurgy API RP 578 – Material Verification for New and Existing Alloy Piping. API RP 583 – Corrosion Under Insulation and Fireproofing API RP 584 – Integrity Operating Windows. API RP 585 – Pressure Equipment Integrity Incident Investigation. API RP 651 – Cathodic Protection of Aboveground Petroleum Storage Tanks. API RP 754 – Process Safety Performance Indicators for the Refining and Petrochemical Industries. API RP 934 – Materials and Fabrication of Heavy Wall Pressure Vessels for High-temperature, High-pre. API RP 970 – Corrosion Control Documents API TES – Tank Entry Supervisor NACE, CWB Welding Procedure Engineers,  CSA178.2-  W47.1-09, W59-13. API650- Welding of Storage Tanks.

Non-Destructive Testing (NDT) Technicians are qualified to CSA-CGSB 48.9712-2014 Level II/III in the following sectors:

Engineering Materials and Components, Aerospace, Light Alloy Castings and Forgings, Heavy Alloy Castings and Forgings and Welds and Weldments for Ultrasonic, Radiography, Magnetic, Penetrant, Eddy Current and X-Ray testing. Other Advanced NDT techniques are certified to QUAD and other world Class recognised Industry certifications.
  • Full range of Non destructive Testing for In-Situ and Remote NDT Inspection covering Surface/Sub surface Cracks, Thickness measurements Conductive/ Non-Conductive Coatings Measurement, porosity evaluation, Alloy Identification, Hardness Testing, Porosity Detection [Visual Inspection, Dye Penetrant Testing, Magnetic Particle Inspection, Eddy Current, Radiographic Testing, Ultrasonic Testing]
  • Third Party Inspections. In-service and New Builds Piping, Vessels, Relief systems, and Storage Tanks (API Inspections)
  • Welding Inspections. (CWB Inspections)
  • Burners, Furnaces and Fired Boiler Systems (Including refractory inspections)
  • QA/QC Inspection & Supervision and Procedures Audit/ Development
  • Joint Integrity: Piping and Vessels Bolting Procedure Design and field bolting (Torqueing/Tensioning)
  • Corrosion Studies and Investigations
  • Asset Integrity RBI/FFI Development

Our highly experienced crews keep safety in mind while focusing on achieving the goals set by our clients. We are committed to collaborating with plant stakeholders and delivering projects on time and on budget.

Unlike many industrial contractors, Quad Integrity & Inspections Group was founded by Professional Engineers. Our field crews are backed by decades of engineering experience. We know refineries, power plants, petrochemical facilities, food & pharma plant, water/wastewater facilities and pulp & paper mills inside out. Our principals are also familiar with the unique operating challenges experienced in these facilities. As such, we apply this knowledge in our project planning and execution, keeping cost and schedule constraints in mind.

Our reliable, fast acting and adaptable service, coupled with our commitment to health, safety & environmental matters are the primary reasons why so many of our customers continue to utilise Quad Integrity & Inspections Group for all their inspection requirements.

Third Party Inspection for:

  • In-service Piping

  • Pressure Vessels and New Builds Piping

  • Pressure Vessels, Bolting-Torqueing/Tensioning

  • Leak repairs

  • Engineering Consulting and Development

  • QA-QC Supervision

  • Inspections

  • NDT

  • Project Management

  • RBSI

  • Oil & Gas facilities

  • Fertilizer

  • Mining

  • Manufacturing

  • Food and Beverage

  • FMCGs

  • Construction

  • Automotive

  • Metal Processing

  • Power Generation and Transportation

Quad Inspection Group has a dedicated Quality Manager within the company who continuously oversees our quality programs and progressively updating to reflect best practice for On-site and off-site inspection activities. We adhere strictly to our customer’s quality and safety programs as well as ensure they are in line with all applicable government regulations.

We conduct above board surveys in addition to rigorous self and third-party audits to ensure high safety standards are not just on paper but effectively implemented.

Upon request, Clients can review our Quality Policy, Health & Safety Policy, Environmental Policy, Drugs and Alcohol Policy, And Company Insurance coverage as well as our qualified Work procedures.

Products/Services

Third Party Inspection for:

  • In-service Piping

  • Pressure Vessels and New Builds Piping

  • Pressure Vessels, Bolting-Torqueing/Tensioning

  • Leak repairs

  • Engineering Consulting and Development

  • QA-QC Supervision

  • Inspections

  • NDT

  • Project Management

  • RBSI

Industries
  • Oil & Gas facilities

  • Fertilizer

  • Mining

  • Manufacturing

  • Food and Beverage

  • FMCGs

  • Construction

  • Automotive

  • Metal Processing

  • Power Generation and Transportation

Safety

Quad Inspection Group has a dedicated Quality Manager within the company who continuously oversees our quality programs and progressively updating to reflect best practice for On-site and off-site inspection activities. We adhere strictly to our customer’s quality and safety programs as well as ensure they are in line with all applicable government regulations.

We conduct above board surveys in addition to rigorous self and third-party audits to ensure high safety standards are not just on paper but effectively implemented.

Upon request, Clients can review our Quality Policy, Health & Safety Policy, Environmental Policy, Drugs and Alcohol Policy, And Company Insurance coverage as well as our qualified Work procedures.